Pinoy Dishwashing

This blog is closing!

2009-12-13T15:57:00.001-08:00

This blog is closing by year-end. All existing post will be repost in Pinoychem. Post regarding this blog topic will be directed to Pinoychem. Thank You. Happy Holidays!

Manual DIshwashing Detergent Liquid H4

2008-08-31T00:01:00.000-07:00

Ingredients	Wt %
Water	30.0
Caustic soda 50%	1.4
DDBSA	5.5
SXS-40	7.5
Lauric Diethanolamide	1.2
Sodium Laureth Sulfate (60% active)	5.7
SURFONIC L12-6
Sodium Chloride	1.5
Water	to 100

Mix until uniform and adjust to 6.5 to 7.0 with caustic soda or DDBSA

Automatic Dishwashing Detergent IV

2008-08-30T00:01:00.000-07:00

Ingredients	% Weight
Sodium tripolyphosphate	30.3
Sodium Carbonate	2.7
Sodium Silicate (2.4 Ratio)	19.4
Sodium Hydoxide	1.5
Clay (Bentonite)
Sodium Hypochlorite	0.735
Sodium Chloride	0.7
Surfonic DOS 75 Surfactant
Sodium Polyacrylate	1.5
Water, Perfume, Dye etc.	to 100

Manual Dishwashing Detergent Liquid H3

2008-08-28T00:01:00.000-07:00

Ingredients	Wt %
Water	30.0
Caustic soda 50%	1.4
DDBSA	5.5
SXS-40	7.5
Lauric Diethanolamide	1.2
Sodium Laureth Sulfate (60% active)	5.7
SURFONIC L12-6
Sodium Chloride	1.5
Water	to 100

Mix until uniform and adjust to 6.5 to 7.0 with caustic soda or DDBSA

Automatic Dishwashing Detergent III

2008-08-26T00:01:00.000-07:00

Ingredients	% Weight
Sodium tripolyphosphate	22.0
Sodium Carbonate	8.5
Sodium Silicate (2.4 Ratio)	7.8
Sodium Hydoxide	0
Clay (Bentonite)	2.0
Sodium Hypochlorite	0.84
Sodium Chloride	0
Surfonic DOS 75 Surfactant	0.3
Sodium Polyacrylate	0
Water, Perfume, Dye etc.	to 100

Manual Dishwashing Detergent Liquid H2

2008-08-24T00:01:00.000-07:00

Ingredients	Wt %
Water	30.0
Caustic soda 50%	2.0
DDBSA	8.1
SXS-40	7.5
Lauric Diethanolamide	1.9
Sodium Laureth Sulfate (60% active)	8.6
SURFONIC L12-6
Sodium Chloride	1.0
Water	to 100

Mix until uniform and adjust to 6.5 to 7.0 with caustic soda or DDBSA

Automatic Dishwashing Detergent II

2008-08-23T00:01:00.000-07:00

Ingredients	% Weight
Sodium tripolyphosphate	35
Trisodium phosphate	25
Sodium metasilicate pentahydrate	38
Surfonic P3 Surfactant	2
Water	12

Automatic Dishwashing Detergent 2

2008-08-21T00:01:00.000-07:00

Ingredients	% Wt.
Phase A
Deionized water	35.00
Sodium hydroxide (50%)	4.00
DeTerge CS-45LF (DeForest)	5.00
Tetrapotassium pyrophosphate	15.00
Carbopol 690 (B.F. Goodrich)	1.00
EnviroSolve Silver or Gold (React-NTI)	0.25
Phase B
Sodium hypochlorite (12.5%)	10.00
Sodium silicate (30%)	9.00
Farona I-III (React-NTI)	1.00
Alcosperse 465 (Alco Chemical)	3.00
Phase C
Tetrapotassium pyrophosphate	16.50
Carbopol 690 (B.F. Goodrich)	0.50-1.00
Lemon/Lime 2026516 (Aromatech)	q.s. or 0.25
Pylaklor LX 9014 Green 1% (Pylam Products)	q.s. or 0.25

Procedure

1. Separately mix Phase A and Phase B in the order of ingredients provided for each.
2. Phase A should appear as a paste and Phase B as an opaque liquid.
3. Add Phase B to Phase A and mix thoroughly.
4. Add Phase C ingredients and mix until smooth and clear.
5. Mix for at least fi ve hours.

Manual Dishwashing Liquid 2

2008-08-19T00:01:00.000-07:00

Ingredients	% Wt.
Texapon LS35 (Cognis) (sodium lauryl sulfate 35%)	7.00
Texapon K14 SPE (Cognis) (sodium myreth sulfate 28%)	7.00
EnviroSolve Silver or Gold (React-NTI)	1.00
Viscos-ABIT (React-NTI)	1.00
Plantaren 1200 (Cognis) (lauryl polyglucoside 50%)	4.00
Dehyton AB30 (Cognis) (lauryl dimethylaminoacetic betaine 30%)	1.10
Ethanol (Merck)	5.00
Rheovis ATC (Ciba Specialty Chemicals)	1.70
Potassium Hydroxide 50% (Merck)	q.s. to pH 8
Water	q.s. to 100

Procedure

1. At room temperature, add the alkyl sulfates to water while stirring (150 rpm).
2. Add the alkyl-polyclycoside, and then heat the mixture to 35°C until homogeneous.
3. Add Dehyton AB30 and ethanol; maintain the mixture at 30°C until homogeneous.
4. Slowly add Rheovis ATC to the formulation and adjust the pH of the formulation to 8 using the potassium hydroxide solution.

Automatic Dishwashing Detergent

2008-07-19T21:49:00.000-07:00

Ingredients	% Wt.
Phase A
Deionized water	35.00
Sodium hydroxide (50%)	4.00
DeTerge CS-45LF (DeForest)	5.00
Tetrapotassium pyrophosphate	15.00
Carbopol 690 (B.F. Goodrich)	1.00
EnviroSolve Silver or Gold (React-NTI)	0.25
Phase B
Sodium hypochlorite (12.5%)	10.00
Sodium silicate (30%)	9.00
Farona I-III (React-NTI)	1.00
Alcosperse 465 (Alco Chemical)	3.00
Phase C
Tetrapotassium pyrophosphate	16.50
Carbopol 690 (B.F. Goodrich)	0.50-1.00
Lemon/Lime 2026516 (Aromatech)	q.s. or 0.25
Pylaklor LX 9014 Green 1% (Pylam Products)	q.s. or 0.25

Manual Dishwashing Liquid

2008-07-19T21:46:00.000-07:00

Ingredients	% Wt.
Texapon LS35 (Cognis) (sodium lauryl sulfate 35%)	7.00
Texapon K14 SPE (Cognis) (sodium myreth sulfate 28%)	7.00
EnviroSolve Silver or Gold (React-NTI)	1.00
Viscos-ABIT (React-NTI)	1.00
Plantaren 1200 (Cognis) (lauryl polyglucoside 50%)	4.00
Dehyton AB30 (Cognis) (lauryl dimethylaminoacetic betaine 30%)	1.10
Ethanol (Merck)	5.00
Rheovis ATC (Ciba Specialty Chemicals)	1.70
Potassium Hydroxide 50% (Merck)	q.s. to pH 8
Water	q.s. to 100

Procedure
1. At room temperature, add the alkyl sulfates to water while stirring (150 rpm).
2. Add the alkyl-polyclycoside, and then heat the mixture to 35°C until homogeneous.
3. Add Dehyton AB30 and ethanol; maintain the mixture at 30°C until homogeneous.
4. Slowly add Rheovis ATC to the formulation and adjust the pH of the formulation to 8 using the potassium hydroxide solution.